Just another Raspberry Pi Case but with a little extra.
I used a SSD1306 OLED Display to check the system resources.
To close the case, just build a Pi sandwich and use M3 screws or similar sized screws. You may have to drill the mounting holes on the Pi itself to fit the M3 screws.
The ventilation hole is self designed. If i inadvertently generated a some already existing symbol with biased meaning... please... tell me.
There are a few improvements between the pictures and the model.
- The mounting flaps are bigger and sturdier
- Resized the top part to fit better to the bottom
- Added a separator between the LAN and USB Port
- Reposition the SD card slot
The display itself uses I2C but an SPI based OLED can already be used.
I used hot glue to mount the display but it is also possible to use screws.
Please note that using jumper wires will most probably not work. There is not enough space to fit the cable connectors. I just soldered everything together.
The code for the display is available at Github