Converted from the DAE file to SVG using openSCAD and inkscape.
Adjusted sizes for 3mm plywood, all the slots are 3.1mm wide. Improved assembly of the wheels. Added a support for the loose end of the wheel cover.
The dimensions are 27 x 13 x 9 cm
A scale N version (1:160, 9mm gauge) is also included, to be made from 0.8mm Kraftplex. This comes as a puzzle card (108 x 65 mm) where all pieces are attached at one or two points.
Strong fingernails and a pair of pointy pliers are recommended tools for assembly.
Dimensions are 60 x 28 x 20 mm. Scale to 105% for an easier fit.
2019-03-31 update: fixed the pop-out connectors for the small one. Added a box for the small one.
Added some radii and made the springs in the lid 1mm stronger.
The box came out as a tight pressfit despite the quite small burn value.
The slot for the lid was widened by 0.1mm as 3mm Kraftplex is actually 3.1mm thick.
More from Vehicles
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving juewei a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.