Pirates of the Caribbean Coin 1 piece

by cyclone, published

Pirates of the Caribbean Coin 1 piece by cyclone Oct 1, 2012
52 Share
Download All Files

Thing Apps Enabled

Order This Printed View All Apps


Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

46385Views 16709Downloads Found in Coins & Badges


I didn't notice there was already a version of this in one piece, apologies. But since this version is different I decided to post it anyway. The two pieces of the coin put together, one version standing with a flat on the bottom. Works well with a raft, which if you left a bit in place after clean up, makes up for the flat. Printed fine at .075mm layer height.

Model has the same detail thickness as the original.

"2 Skull" version has the skull on both sides TwoFace style.
There is also a necklace version.


  1. Print standing up with a raft. It might work without a raft but there is a fairly small area stuck to the table so failure is very likely without one. Standing the model up takes advantage of the higer z resolution so I recommend a low layer height. These were printed at .15 layer with skin half that height at .075mm.

  2. Be cursed, until you can get the gold to Isla de Muertos.

More from Coins & Badges

view more

All Apps

3D Print your file with 3D Hubs, the world’s largest online marketplace for 3D printing services.

App Info Launch App

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Print through a distributed network of 3D printing enthusiasts from across the US, at a fraction of the cost of the competitors. We want to change the world for the better through technology, an...

App Info Launch App

Quickly Scale, Mirror or Cut your 3D Models

App Info Launch App

3D Print a wide range of designs with Treatstock. Easy to use tools to get the perfect result. The global 3D printing network that connects you with high-quality and fast working print services nea...

App Info Launch App
Comments deleted.

What is the skin height 0.075mm? is this equal to the cura "shell thickness" setting? I can't set it below 0.4mm, which is the nozzle size, please help.

I think you misread. It says layer height of .075

Please explain this in Cura terms: "These were printed at .15 layer with skin half that height at .075mm."

you lose some of the detail if you shrink it down

Print in bronze fill and polish! :)

What did you use to slice it? It came out really nice!

 I used Cura, which is using a modified version of Skeinforge.