Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

Parrot Anafi 10" tablet holder

by PhilippeM Oct 14, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Hello, I have a 9.7 "ipad pro, can it be okay?

Hello Giuseppe,

Yes you can use this print for your Ipad (6,1mm thin)


Nice design. I too had to make the top hook wider to accommodate my 2017 Ipad. I also printed it on its side.

love it! such a functional, yet simple design which even incorporates the remotes own spring tension system, AND is fast to print on top of that.

i had to load it up in tinkercad to make the top deeper to accommodate my huawei mediapad t5´s thickness, it was just a tad to thick. very nicely solved, unlike some other solutions which rely just on the clamp to pull the printed part against the tablet, without any secure connection to the remote.

clever thinking

Can you share some source file, where I could change the length/size to fix my tablet with different size screen?

Hello. I printed this at 100% scale, and the size is incorrect to fit the controller.

The width of the opening of where it "hooks" onto the Anafi controller (the part that is supposed to straddle the controller extension arm), is only 20.7mm. The width of the controllers arm that the wifi antennae is connected to is 30.20 mm. This makes the opening on the printed part 10mm too narrow to go over the controller arm. Coincidentally, the 2 "prongs" are 5mm wide each, added together is 10 mm.

Could you have measured and scaled it to the outside dimensions, instead of the inner dimensions?

It is kinda hard to explain, so I have attached a photo:

The width of the inner part that hooks to the Afafi controller is 20.62 mm . The width of the flip up arm on the controller is 30.31mm


Hello John,

To insert the bracket, pull on the antenna and place it on the invisible male part when the antenna is retracted. I hope to be clear:)

A photo to illustrate.