This is a three-in-one guitar pick that can be used for many different play styles. It features two pick ends for strumming, one at 1.4mm and the other at 0.6mm for a variance in strumming thickness by having a heavy and light end on the same pick. The third pick end was inspired by a jazz pick, as it features a sharp point and a heavy thickness of 1.4mm to allow precise plucking. By having all of these different pick ends on one pick, one is able to choose between a light and heavy pick relatively easily in the middle of a song as well as being able to switch from strumming to plucking without the loss of precision/quality one would experience by using a pick that was made for solely plucking or strumming.
MakerGeeks Crystal Series PLA
I found the best results with the MakerGeek Filament was when I used a 235 degree (Celsius) nozzle temperature for the 1st layer and a 230 degree nozzle temperature for the rest of the layers.