I decided to design a wallet that would only be a single print and not require any glue.
It works with a tight toleranced zipper on both sides, and a clamping closing mechanism at the top.
If one chooses to change the filament color half way through the print, one can get really cool color combinations!
Next week i'll release a coin purse and a smaller wallet.
The week after that ill release an "inside out" version of all the wallets that should give a really nice look from the outside.
Please leave opinions and design change requests in the comments!
Check out my social media for sneak peaks and memes:
-New sizes released! -Smallest, small, and medium; (https://www.thingiverse.com/thing:3216321)
-Video on how to assemble released:
-Removed Prototype from the files, since its now available as a full release in the link posted above.
Check out Caedo's Zipper sizer tool to be able to easily dial in the correct amount of "Horizontal expansion compensation" / "X-Y compensation"! :https://www.thingiverse.com/thing:3311958
If you are having adhesion issues, try printing the first layer a lot slower than what you usually would print for smaller models.
Depending on your printer, you might want to use some negative horizontal expansion compensation . I used -0.07mm