This bridge is very fun because it has a steep slope. Therefore, it is ideal for jumping a small radio control car or even a large one if you scale it to a larger size. It also serves to test the climbing ability of your 4wd rc car such as the Jeep Orlandoo 1/35 scale.
The bridge is very large (680 mm) so I include 2 possibilities. A file all together(BridgeInOnePiece) and the same divided into 5 parts.
In the photos is the bridge printed in 1 piece scaled in the cura program x: 70% y: 70% z: 100%
18 M2 screws and nuts are needed for the bridge in 5 parts.
No needed screws if you print "BridgeInOnePiece"