The Gen-16 Digital Cymbal Processor ships with a pretty rudimentary fixed-angle mount that isn't particularly compatible with a lot of other drum rack hardware. This design features a 22mm mounting tube and a tilter. Add an M6 x 25mm hex-head bolt and slide an M6 nut into the thumbscrew and you're good to go. The DCP mounting pad has a hook like the original, as well as two holes for M4 screws to hold the DCP more securely.
After printing the one shown in the photo, I rotated the pivot so that the thumbscrew would be on the right (sorry, lefties!).
The mount shown was printed in ABS with 0.25mm layers on an Afinia. Seems plenty strong, but if you really want ultra-durability you could try nylon or PolyMax PLA.