Loading
Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
denis0k

Customizable Pipe wall lamp. Loft style.

by denis0k Oct 26, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Question: what lamps do you use.? usb or electric. In my mind, electric would be too hot and would not be good with the plastic. thanks Great work.

I am using some led lamps and some edison-style low power incandescent lamps for more than 10 months and have no problem with abs plastic.

thanks. I might try that someday. I made 1 lamp but I used a usb 5w light. I never thought it was possible to use a normal socket light fixture you plug into an outlet.

Nice work!!! thanks for sharing) with abs plastic and led lamps I think it really possible to make)

HEy, great work. Do you have a straight connector?

pls check straight_con.stl, is this one what you need?)

Hi! thanks!
I haven't it now, but can model it for you, stay tuned.

Hello,

can you also post an 30° angle for the loft lamp? The tree connectors were also very interesting.

Thank you so much for that great work!

I've added 30° connector just now) but as one solid model. I think it not need to be splitted.

Thank you so much!

Your kit of different connectors is so great! It make so much fun to design the individual lamp. I'm really sorry but I'm a poor beginner and I can't modify so I will ask you to add another 60° connector. I'm really sorry and I really tried it.

No problem! Please check this design, I've added angle_60*.stl files. With solid and splitted in two parts versions of angled 60deg connector.

Thank you so much!!!

urw! Please post a make when you'll done your lamp design)

Hello!
All available tree connectors were uploaded already.
I haven't 30° angle modeled now, but if you really need it, I can model and post it)

для тройника не хватает средней части...
залей пожалуйста !

у какого? проверил, вроде все на месте.

Амазинг Товарищ !))

If anybody needs tree connectors for own designed lamps, I can share them too

Да, да - было бы здорово!
Какие краски применяли? Помнится пробовал однажды делать подобный эффект но верхний слой краски прямо проник в нижний - не очень получилось.

обновил проект)
Project was updated

сначала сглаживание ABS-соком (ДХМ+стружка абс), потом слой краски-грунта, потом краска под медь (Кудо кажется), потом простой акриловой краской кистью покрывал и тут же стирал бумажным полотенцем до высыхания. Ну поверх можно еще матовым или глянцевым лаком залить...

Экселент ворк комрадэ!

Сэнк ю вери мух!