Really excited about the new #DungeonCrawlClassics Kickstarter by @GoodmanGames! Doug Kovacs' new cover art got me inspired to start working on next year's #3DPrinted tourney trophies.
Check out the @kickstarter here: http://kck.st/2CFsH09
Follow us on twitter for more gaming related goodness: https://twitter.com/Io2d6
Like what we do and want to support us? Become a Patreon! https://www.patreon.com/2d6io
You can grab this year's tournament trophies here: https://www.thingiverse.com/thing:3125519
Update: 2018/10/28 - 9:44 PM EST - [Test Print @ 75% size, 20% infill w/ supports]
Came off the bed with only a few tweaks needed:
- Cross ornamentation on headdress needs reinforcement
- "Annual" engraving needs to be better defined (or printed without support)
Currently attempting a [Test Print @ 75% size, 10% infill w/ NO supports] to see if that addresses above issues.
Update: 2018/10/29 - 6:20 AM EST - [Test Print @ 75% size, 10% infill w/ NO supports]
Printing without supports works beautifully. Still need to address the cross ornamentation on the headdress. May provide it as a separate item that can be glued on after printing. Updated images to reflect new print.
Update: 2018/11/02 - 4:27 PM EST
Corrected an issue with the Kovac's Pentagram. Special thanks to @fantasmoslam for catching it!
Added the headdress decoration as a separate print. Note that it prints flat. To get the curve you need, use the hairdryer method to slowly flex it.