Elephant is the system study to colder material just printed.
Is Project for tourbine use 50mm x 50mm tourbine
this system apply on Prusa i3 with metal structureand E3D-V6 2in 1out upgrade.
Scorpio is study to keep cold the coldend of the hotend. is project to print in two part and glue after printing.
Finally there is the Support for Hotend E3D-V6 (2in 1out) appositly for this project group.
All group is show in this "Thing"
This sistem was tested on my Prusa i3 Bowden extruder.
I work until 25hours continuosly
Material use was PETG so hight temperature.
I sudjest to print this Fully density 100%
Hotend Temperature : 245°
Bed Temperature: 75°
Any PLA - PETG - ABS -