Remix of the awesome SJ 410 body Domi1974 made but set to aprox 1/10th scale for the narrower axles of the lower mini crawler/ECX barrage family (both are the same width)
Use with 1.55 wheels and tires of your choice and design a frame as needed.
Still a work in progress as I'm slowly working on things when I have time.
lower door molding is meant to be glued into the fender flares.
Just a heads up if you try to use some of these parts on the original scaled up but the body was narrowed about 4mm from the middle (not stretched actually cut an merged)
I did this out of aesthetics as the body just seamed wide when compared to my 1:1 88 samurai
So any parts that make up the middle of the body will be narrower when scaled up. Things that make the left an right sides should rescale up to the correct side if wanting to use with the 1/9 version.
Mix between using an not using supports an rotate the parts as desired to get best finish. Some parts are TIGHT and may need a bit of sanding an shaping.
use rubber cement lightly around the door, targa bar, upper door frame, windshield frame to get everything situated properly before doing final glueing