Polynesian sign based on the signs at the Polynesian Resort at Walt Disney World. The Tiki Room was just a fun name we decided to throw on it. Also included a non worded version so you can add your own room names.
Make sure you set your slicer program (I use Simplify 3D) to inches instead of mm as i modeled it in inches.
I suggest you use CA Glue to attach parts.
Seams use either bondo or CA Paste (CA Glue mixed with baby powder)
XTC-3d by Smoothon for the clean up of print lines.
Steps of how i put parts together.
1.) Glue parts together (in sections that make logical sense)
2.) Light sanding
4.) Light Sanding
5.) Filler Primer
6.) Repeat steps 4 and 5 until desired finish
Found some reference images that i took a couple years ago when i stayed at the poly and built it in fusion 360.