Caliper holder for easy bed leveling on CR-10:s with a fang mod. Find out the correct z-hight once and for all and it will be easy to replicate and get all over the bed.
The caliper goes through the holder and rests on the bottom screw of the x-axis carriage. Thereby having a very consistant distance to the bed.
Measuring is done by lowering the x-axis gantry to Z0 and then push the caliper depth probe toward the bed. Repeat that for the four corners and center.
Requires the stock metal fan cover and its two screws removed. One M3 10 mm screw is needed to mount the holder. The hole for the caliper is 16.5 x 5.4 mm.
Two g-code files included for leveling assistance on CR-10 (300x300x400) and CR-10 mini (300x220x300).
0.4 mm layer width