I designed this body to hold a camera in the third person view and rotate the view with a headtracker and a 9g servo. It should fit (K969 K979 K989 K999 P929 P939) models as long as the rims and tires will not bind on the body.
Mine is a p929. I replaced the stock wheels and tires with drift ones and extended the wheelbase with the extra part that was included in my kit (thanks WLtoys!).
There is a clip-in spot on the right for an Eachine ATX-03. There is a snug spot at the front for a small battery for the vtx and camera. The camera mount is for a Runcam Nano.
- WLToys 1/28 RC car with drift wheels/tires
- Standard towerpro style 9g servo
- Eachine ATX03
- RunCam Nano
- Small 1s battery for video system
***The lights are all 3mm LEDs, 6 in the rear and 4 in the front.
Thanks for looking!
UPDATE 11/26/18 - Added files for driver side vtx configuration. This should keep the vtx away from the heat of the motor.
Model has some mouse ears/feet on the corners to help bed adhesion. These should be removed with the support material. There is also a thin lip across the rear bottom that should be removed.
Print all models with supports except for the bumper. The bumper should also be rotated so that there are no overhangs.