I took the rotary plate from http://www.thingiverse.com/thing:161378
(Rotary plate for 3D Scanner by VattaFarI) and resized it to 130% which is the 195mm size that works for the 3D Scanner based off FabScan open source project by Ceb (http://www.thingiverse.com/thing:284142). So far this one works with the 3mm screws on each size of the motor under it for the turntable. Please see my comments under Ceb's project if you are building this. This was my third turntable and it works great. Now I just need to fine tune the software!
More from 3D Printing
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving ghfame a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.