Another cover for 2020 or 2040 frame. Keeps the dust and debris out of the V-slot.
The top of the cover is as high as the top of the frame, so it can be slid under mounted parts. Sometimes with a bit of persuasion.
There is more than enough room for possible cabling.
The part itself is designed as light and cheap as possible.
I added a basic cover of 100 mm length, you can scale it in your slicer (X-axis) to the right length.
Also added is a complete set of covers for the under-frame of the Tevo Tornado (4x275 (sides front), 4x175 (sides back) and 4x188 mm (front and back)). A second set is added for the 500 mm long 2040-frame for the Y-carriage (2x275 and 2x225 mm). It can be covered without any technical problem.
The covers are light enough to cut to size with a filament cutter when they are too long.
Happy frame-covering :)
I sliced them with 10 walls/perimeters. Of course there is no wall with that thickness, but it gives a nice smooth top and a nice quit print without shaking. You can also set your speed pretty high cause there are only straight lines.