Camera mount to mount a Caddx Turtle V2 HD camera to enable a dual-camera configuration. I use a Runcam Micro Eagle for FPV and Caddx Turtle V2 for HD video.
(Caddx Turtle V1 may work as well. Caddx Turtle V2 and later batches of V1 have a different and slighter larger camera than earlier batches of V1).
Print using 0.2mm layer height. Support is needed. Infill 15% - 90%. If you are using 15% infill, use triangle pattern to give it more strength. (Weight is about 4g when using 15% infill).
This is still work in progress.
Updated 11/13/2018 - Added a version for Runcam Split Mini 2.
Updated 11/25/2018 - Added versions with antenna tube holder to provide better lens protection and to prevent the lens from touching the ground and grass in a faceplant. Insert an antenna tube and cut it to length so that it's not in camera view. (The exposed part is about 7mm long)
Updated 12/10/2018 - Added a beefier version of Caddx with tube protection. Also, adjusted camera screw holes.
Updated 12/27/2018 - Added new versions for Split Mini 2 with the new larger M12 Lens. Runcam has started shipping a new camera housing with a larger lens (M12) in the latest batch.