Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
True variable width spool Holder
by 4ndreas, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is an adjustable width spool holder.
It is meant to mount on the bottom of a solid plate.
I'm sure if the inner parts are needed for stability.
Most spools should fit, I changed the design a little bit I hope the taulman spools fit now, but no promises.
Some additional parts needed:
4x LM8UU linear guides
2x 8 mm steel routs
4x DIN 7991 Screws M8x25
4x DIN 934 M8 nuts
8x washer 8,4x30 mm
4x bearing 8x22x7mm (DIN 625)
2x DIN 934 M4 nuts
2x DIN 912 M4x10mm screws
11x Screws 3-4 mm of your choice to mount the holder on the plate.
For more information about the printer visit my build blog:
The large washers should bend a little bit to give the bearings air to spin.
To do this I used a 27mm socket wrench.
Tools & Utilities Apps
Repair, slice, or enhance this Thing
True variable width spool Holder by 4ndreas is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving 4ndreas a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure 4ndreas would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).