D&D 9 dice box with figurine

by Keln Nov 17, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

So I just printed this, I truly like the design. I thought you fixed the D6 problem with the top part (see comment Jan 13, 2019). There's a 4mm difference between the D6 gap in the bottom and the top.

Since the top is high enough, couldn't you make all the spaces for the dice equal? So you don't have to fiddle with the dice because they are not in the right spot if you print the 'no numbers' version of the top. Just an idea, I don't know if this makes the dice too loose in the box itself.

See the most recent update. Sorry about that. I did make the updates and should be fine now.

Print finished, but the D12 and D8 indent misses about 1.3mm. The lid doesn't fit properly. I'll try to pry some filament out of it to make it work. But maybe in a future update you can look at that an make it a little deeper :)

Sorry about that, I measured based on these dice https://www.amazon.com/gp/product/B071SK9FQY/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Can you give me measurements of your D12 and D8 in milimeters?

I could try to edit the files myself if you could share the editable files. (fairly new to editing/designing)

The D8 measures 15mm and the D12 19mm (rounded up from 18.6mm). I hope I'm not annoying you with this, just trying to help out.

Awesome! Looks great, print started. Once it's finished i'll surely post my make. :)

Just printed the D&D top and it does not fit the bottom, because there is no indent for the D6's at all.

Sorry your print did not turn out, Can you add a picture of the print?

I ended up punching the portion i needed out and sealing looks okay. I didn't take a picture before I modified it sorry.

Sorry for missing that, I have uploaded the versions with the correct places on the top for the d6 and 2 small d6

Hey just noticed that the tops you posted don't have an indent for the d6's. which I think would make it so they don't fit in the box.

Picture #4 (now labeled "Top") shows the small D6 on the top side of the top in the picture, the larger D6 on the bottom of the same picture.

Hello Keln, This box look really nice but while the pictures show the D6 indent on the top side the actual model doesn't have it. Neither the dnd printed one nor the plain one.

Sorry about that, can you show me a picture on your end in your slicer, and/or the printed one?

Here is a screenshot. But you can check your uploaded models as well in Thingiview. They don't have the indent. My gues is you uploaded the wrong stl files :/

Thank you for the screenshot, I did not notice the issue. I have corrected the problem. Thank you for noticing the problem and letting me know.

I printed it and the top doesn't have enough room for my full size D6.

This is awesome! My friends and I are really big into D&D. Im looking forward to making a few of these. Just wondering, what is the height and width of the center area for the figure ?
Thanks for making this and sharing it.

Glad you like it. I really like it.

I added two pictures with the measurements.