Bookshelf spool hanger
by skriver, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This thing allows to save some space on your desk by hanging filament spools under a bookshelf. The hanger bars can be also fastened vertically to a wall - I didn't try this configuration but it should works :) They are really tough and should be able to hold a big and heavy spools too.
Designed for the 3 mm screws with a flat (countersunk) head shape.
Dimensions (width x height x length):
- Center: 24 x 13 x 160 mm
- Left / right: 17 x 13 x 160 mm
I printed this thing with PLA, 0.2 mm layer height.
Because of overhangs above the slots it's better to use supports.
A complete set consists of one left and one right element, plus any number of center parts. Because holes positions in all parts are the same, if you get a new spool, you will be able to replace already fastened left (or right) one with newly printed center element, and move the terminal element one spool further :)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Bookshelf spool hanger by skriver is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving skriver a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure skriver would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).