Ender 3 PSU cover with USB

by mfau Nov 19, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Very Nice Design!!!....Just Wondering what material you are printing with?...PLA, PETG, ABS, Nylon???

Thanks In Advance!!!

Thanks :) The original prototype in the pic was only PLA, but I did my final version in ABS just in case heat would become an issue.

Very Nice! Thanks for sharing. I am interested in printing this out, but I've experienced that not all power supplies are mounted at the same height in different versions of the Enders. See Pic. Other thing I tried to print out but realized that my power supply was mounted at a different height (https://www.thingiverse.com/thing:3023240/comments)

How high off the bottom rail was your PSU mounted? So I can figure out prior to printing whether this would work for mine or not.

Ender 3 PSU support

Thanks for that info... I would have assumed they were all built to the same specifications at Creality's factory.

I just swapped the cover back to stock and measured the gap between the bottom of the cover and the bottom rail; it appears to be 17mm. Given the STL of the cover you linked above uses an 18mm wedge, it's probably within a similar tolerance to mine, meaning it probably won't fit your printer sorry :/