This is a canopy made for the beta75x (2 differents version available). You can fit the original camera with the included camera mount or use directly a caddx eos camera 14x14mm. It has 1mm thick walls and base of the canopy is pushed against the frame to reduce stress on the screws during an impact. Please leave comments so i can improve it.
the last canopy is for camera 19x19 Caddx Turtle not tested yet,we think use double face tape to stick pcb on flight controller
we will have more amazing frame at:
print at 100% fill TPE or TPU
225 to 235 C