Raspberry Pi 3A+ with Pi1541 IO hat case giving full access to the main outputs of the IO hat, including the two 6pin DINs, the 5 side buttons, the 2 leds & the OLED connector. Also has a commodore logo over the GPIO buzzer so it is not covered up and a larger logo on the bottom doubling as an air vent.
Print top and bottom sections and 2 x stands for the hat
Secured with 7.5mm M3 pan head screws (black)
*Small revision moving the reset switch hole 0.5mm so it's a better fit
**Added a second version with holes for mounting an OLED cover, cover also added
Switched support from Cura standard to experimental trees as it adhered better to my bed, your milage may be better.