NOT the "H" version, and probably NOT clones.
Official Manual: https://jyetech.com/Products/LcdScope/UserManual_138mini.pdf shows title of "DN138-12v02" and Model: 13805K - if your DSO138 does not precisely match this model it will not fit in this case.
The model this thing is for does not have a power switch, which is why the BOM below adds one.
The model this thing is for has slightly rounded square edges on the PCB, not large trimmed corners. This should make it visually apparent which one you have.
Superseded by https://www.thingiverse.com/thing:3322112
But maybe still useful if you need a simpler case.
None of the improvements in the newer version flow back into this one... at this time...Consider this an abandoned design that still works ok for these (USB/XH) power port solutions.
Supports BNC probe connector, USB and XH power ports
4*M2.5x20mm bolts and hex nuts
Drill/cut out the single layer 'blocking' the four M2.5 nut recesses in the base. It's there to force bridging so it doesn't need supports.
Works for me:
Print at 0.4mm nozzle, 0.2mm layers, otherwise all design tolerances will be wrong.
It is a good idea (maybe essential) to specify 0.4mm wide outer perimeters in your slicer.
PLA works fine.
More from Electronics
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving BETLOG a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.