Just an idea I had for a macro pad. I had all the parts available(except the diodes) and just designed a case to house everything. I had some issues with the screw holes lining up perfectly and I had to take a file to the switch plate. Much respect to anyone that hand wires a 100+key keyboard.
12/6/2018 Added qmk code and .hex file to files: bigswitchpad_qmk.zip. Added .step file.
- If you are new to QMK, this guide is very helpful
12/1/2018: adjusted switch plate to .2 clearance on all sides. I forgot I had left it at .39, but that was because I had such severe elephants foot on my print that it actually filled the gap for me.
3d solutech pla