This is my First "thing" i have created, i wasn't happy with any of the other frame braces on here so i designed my own.
The top Frame pieces are held to the frame with 3 x 15mm m5 bolts each and m5 nuts ( holes need to be drilled in Anet frame)
I Printed the top and bottom Threaded rod Supports with Support, not sure that it was needed but it worked for me.
The Main Frame Pieces, Flip theme upside down and print without support.
6 x m5 15mm
6 x m5 nuts
14 x m8 nuts
16 x m8 Washers
M8 rod lengths:
1 x 380mm
2 x 520mm (roughly)