Loading
DICSOFT

3D_RGB_DreamLight

by DICSOFT Nov 25, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Printed this. Came out great. All parts fit together just fine.

At first I thought, the LED matrix panel I have here is just too big until I realized I can cut off the edges to fit. It's a not too tight press fit into the tower part.

Any chance to get some pre-made Arduino code for different lighting effects? I have some sample code running, but perhaps someone has something ready, which is a little optimized for this.

This one works great right out of the box...
www.banggood.com/Mini-USB-3-Keys-Button-Controller-for-DC5V-3-Pin-WS2812-2811-Digital-LED-Strip-Light-p-1224310.html

Appreciate your kind words!
Nice video!

Wonderful design!
Here I tried to record the assembling process https://youtu.be/6XdBONpMETo using clone of Arduino Nano as a light controller.
Audio Reactive version -> https://youtu.be/_7hqHuG4Iy4

Hello,
so the towers are designed to be hollow. As you can see on the image a single tower is 6mm in square with a wall of 1mm.
If printed solid the light effect gets lost.

Got it. Thank you! Posting Make.

Yeah, I had to use manual supports in S3D. It wasn't printing solid, it was the support material going up in the tower.

To avoid manual support just set your automatic support feature to ‚make support just for angle e.g. bigger 89deg.‘
Especially for that I‘ve designed a skew at the inside of each tower to use it.

Hey, so are the towers supposed to be solid?
I assumed they would be hollow but looks like they are printing solid.

This is beautiful. Well done!