Doorstop clamp to hold doors open. It can be folded to avoid grabbing the doorstop. Compatible with cylindrical 20mm Ø doorstops. Attachment done by 2 screws: Ø3 x L20 mm size. Phillips counterbored sunk head.
Hinged. Be sure that heatbed is not too hot or first layer too low in order to avoid the thin gap between body and clamp to be filled with material fusing the two parts together (otherwise you'll have to use a cutter knife). If you can see the gap in the bottom part, gently bend the clamp upwards helping you with some pliers. Folding it 90º the first time will be enough to break it loose and be able to fold it without too much effort.
I used CATIA and designed as a whole unit.