This simple tool is designed for the FTC 2018-19 Rover Ruckus inspection tables.
The tool includes a rectangular hole to measure the stroke width and height of the team number on the robot. The three corners are set at 3 inch, 4 inch and 8 inch for the team marker measurements.
The included files are an stl and dwg of the 3d object and an dwg and 2010 dxf of the 2d file.
The dimensions of the tool are 9" x 8" x 5/32" (228.6 mm x 203.2 mm x 3.9687 mm)
Since the tool was originally designed to be cut out with a laser cutter, the 3d file was not optimized for smaller print beds less than 9" x 9" base. I will make an updated version better suited for 3d printing. In the meantime, feel free to modify the files to better fit the needed print bed.
Make sure that if cutting the tool with a laser cutter, set the 12000 Split logo to etch/engrave or else it may cut out that section leaving thin lines in its place.
Oregon FTC team #12000 SPLIT