Hotend housing for the anycubic i3 mega.
([email protected] sorry for my bad english!)
Original component cooler does not fit, an external fanduct must be used!
printed with ABS (PLA works too)
What u need:
M3 screws with nuts
M4 screws with nuts
3x resistor for 12V
35x35 acrylic glass
Optional u can print this for better look ;)
First the board with the connectors for fan power and hotend must be laid out.
You have not enough space in the box with the Led.
The acrylic glass must be processed with the sandpaper otherwise you see nothing of the led light.
- The 12v supply for the led I took from the hotend cooler.
Please feedback in the comments
original from stewi87 - Thank you very much ^^