I was looking for a cheap alternative for 1/10 Axles. I already tried some from thingiverse but decided to add another version. The target is to make them solid and as small as possible. It is not ready to print yet because it is still a Work-In-Progress.
2019-03-18: User GothDog improoved the C-Hubs. Maybe you can use them: https://www.thingiverse.com/thing:3499599 Thx GothDog
2018-12-06: STL-Files for 3-4-Link Setup on Yota-Style-Axels; 11mm Bearings
2018-12-04: All STL-Files V1... are tested. You might need to sand/drill it to have a perfect fit but they soon work; 11mm Bearings
2018-12-03: Rear Axle is ready to print. First testprint turned out fine.
STL files for leafspring setup -> uploaded.
2018-11-30: 2 STL for Rear Axle Houses for M3 Nuts and Screws without Link-Mounts
2018-12-01: First print; not the perfect fit but close... :-)
We will see if it will work in the near future. If it works it will be a quite cheap way to build working axles at a price of approx. 12 EUR plus the used filament for two axles.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.