TinyTina 90mm - Mini Drone Frame

by jnscz Nov 30, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Thank you for the cool design :-)

*****FYI: It seems that currently the motors for this print are pretty hard to find :-(

Popular Chinese sites claim to have them (while everyone else is out of stock), but they can't seem to be able to ship them. I ordered everything I needed, and in the mean time printed the drone parts like crazy. Now I've got a stock pile of spare parts, but am unable to get the parts needed to finish it......

This model was featured in a Prusa blog post and literally was what made me pull the trigger on getting into FPV drone hobby. And thanks to popular sketchy Chinese websites, I've been impatiently waiting for over 1 month for my parts, and they haven't even provided any tracking info. I really wanted to go this route for my first drone, but the parts are really testing my patience.

Is it possible to add sensor to stabilize it specialy in z axis.

I have seen it asked already, but will you share the STEP files for this please? I want to add a different camera mount and would love not to work off of an STL please.

Thank you for all the work! This will be my first "from scratch" quad!

Great design! Yet would it be possible to rotate the motor-mount holes a couple degrees towards the cable channel, so the cables won't collide with the walls? See dotted lines in the image as the axis for the rotated new holes. Thanks!

Parts are printed and now for the long wait for the electronics. How have people found the build and how little Tina flies?

I designed a case to keep this in: https://www.thingiverse.com/thing:3399096

Tiny Tina Drone Case

How did you design this and please can you release the original design files? I would love to mod!

Please give me the STL file of the frame

Great design. Was about to get into FPV with a prebuilt microdrone but this is way more suitable. Minor suggestion, LEDS on the arms? The FC seems to have pads for it.

I agree, that would look great!

I would like to modify the frame for a 75mm micro drone.

What setup do you use? (Like remote googles etc)

Racerstar RC1103B 8000kV Motors + 2035 props
HGLRC Flight Controller F4 + HGLRC 4in1 ESC (13A per motor)
2S 300mAH Lipo (around 4 minutes of flight time)
Eachine AIO FPV Camera with built-in transmitter (https://www.banggood.com/Eachine-AIO-FPV-5-8G-25mW-48CH-VTX-600TVL-CMOS-14-inch-Camera-For-Aurora-90-100-Mini-FPV-Racer-p-1122902.html)

FPV Goggles - Eachine VR D2

As for the RC, I reused my old FlySky TH-9X transmitter with FrSky DJT/DXT module (with FrSky XM+ receiver)

Thx for the answer!