Pokemon birthday candle stands
This design gives an upgrade to the usual flowers at the bottom of birthday candles.
If you want to make the Birthday extra special and support what we are doing, you can buy the full set that includes all the Eeveelutions for $3 here: https://cults3d.com/en/3d-model/various/pokemon-birthday-candles-eeveelutions-and-pikachu
They are designed so that using a single (or in some cases double) filament change you can give the pokemon the color it’s supposed to have in the right places, but you can print them with just one color and they will look just as good. It it sure to be a great surprise at any celebration for someone who loves pokemon. This design uses the basic shapes of all the Eeveelutions.
The needles should be printed separately and then glued together to save support material.
The holders are designed to hold normal birthday candles approx. 4.5 mm in diameter. You can scale them to fit abnormally sized candles however you like.
Have a look at our Facebook page or visit our website to find out more about us:
3D printing settings
To make the filament change you can pause it manually or the better solution is setting a specific layer height at which the change should occur. The command M600 can be insterted right before the command layer XX in the text of the gcode. Or you could use a site like Color Print https://www.prusaprinters.org/color-print/
Variety of colors
Colors changed by adding a M600 command before the correct layer number