UPDATE: modified y-carrier mount.
UPDATE: mirrored and fixed an issue with the x-carrier mount.
UPDATE: minor tweaks on the y-carrier
UPDATE: added a mount for https://www.thingiverse.com/thing:3164672 (only works for mirrored verson /left handed)
Are you building a v-king? You want cable chains for x and y axis instead of what comes with the package.
If you did we are two.
I have modded the x-carrier bowden bracket to mount a cable chain to it.
Also made a y to x-carrier mount.
Frame mount have a few holes in it that can be used to either just pull the cable out in the back or pull down in the extrusion if the frame allows that.
x-carrier v2 is supposed to be mounted on the original bowden bracket using screws.
But i recommend the other one since room is a premium in the chain and screws usually dont have low profile heads, but if you do have screws like this, feel free to save some printing time.
It will hopefully look a bit cleaner with only the bowden ptfe tube arcing over the printer.
Cable chain this was made for: https://www.thingiverse.com/thing:2105040
Other mounts for 20x20 from me: https://www.thingiverse.com/thing:3167918 These i use for the z-axis.
Picture shows the chain.
I suggest you print in the orientation like in the picture up top to minimize supports needed.
Infill wont be needed if you add 4 or more perimeters, this will make for a stronger part.