This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/fKuiL4wmnpz
This has been printed and tested!!!
To join it, you will need 6mm X 1.5mm Magnets (can buy off ebay cheap!)
each panel has six magnets - if you do it properly, all the panels should join in any order!
be careful when you glue them, its hard to remove them without wrecking the panels!!!
The Main Panel = 180mm X 158.17mm X 8mm
The Wall Panel = 180mm X 141.9 mm X 8mm
Corner Joins = 180mm X 19.75mm X 18.67mm
The Main Panels can be printed with 10% infill, Make sure you have 5-6 top layers and the fan on to combat the infill. have only printed in PLA
The Corner Joins - print with the panel between the magnet holes facing up! saves wasting plastic on supports. - best to have your fan on to help print!
Please feel free to take the design and make Mods to it!
tag me or post up your version/pics so i can check it out!
Happy Gaming - Berko!
Cocoon Create Touch / Wanhao I3 Plus