THIS ISN'T FINISHED YET
“High risk and high reward, the infamous AWP is recognizable by its signature report and one-shot, one-kill policy.”
Thanks to this model you will now be able to print your own AWP replica.
This is a 1:1 scale AWP from Counter-Strike Global Offensive.
The model is cut in pieces to be easier to print, sand, polish and paint.
It would need a little bit of glue (a lot lol).
You can also reduce the raw model to make a smaller one.
I will upload the printed model painted with the electric hive ;)
12/06/18 First upload, model splited a bit, not finished.
12/09/18 2nd upload, cannon splited more, small parts separated, scope slited for easier printing.
To make it look like a real one you will need to get sandpapers (500~50µ).
I personnaly use a mastic spay between each sand for a best polish effect at the end.
IF YOU WANT TO MAKE THE ELECTRIC HIVE
First you sand every parts (with mastic for better effect) to make all the surfaces as smooth as possible.
Then you have to do the black parts, so take appart the good parts and paint them with black spay paint (and maybe use a vernish spray when it's totally dry).
The second part is the hardest.
You have to paint the fade background (the purple/blue/orange/red/pink color)
Then you will need a lot of patience, because you have to put masking tape on all the fade you want to keep on the replica (I personnaly use the 3M blue tape). For that you could us a scalpel or a precision cutter.
Spay the black color (and maybe some dark purple like mine) on the whole model.
Finally take off the tape and glue all the parts together.
And voilà !