This phone case is designed to secure the phone connection on an FTC competition robot. The case can be attached on top of Tetrix C channel or along the small 90deg angle bar.
Teams should purchase a Micro USB Cable - A to Micro B with a 90degree angle at the Micro B end. Teams should also use the protective case that comes with the phone from FIRST.
Plug the phone into the Micro B, then place the phone into the holder. The Slim wedge is used on the end opposite the Micro B port. Then wedge will secure the phone so it is tight while you drive the bot.
Note: the small hole in the wedge is for a zip tie. We found the wedge easier to remove when the zip tie was in a loop and we could pull up with our fingers.