This body is used to cover the USB version of the Digispark ATTINY 85 PCB. The hole at the bottom will be used by a photoresistor in our case. In some the 3D print sometimes must be adapted in width to the delivered PCB width. This can vary 0.1 mm. The PCB must fit with the front boundary of the body, otherwise the built in connectors might be too short. Please check that before printing or glueing finally.
Image will be provided later --
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/29mwFBs5xHI