The original MK3 LCD cover, with the bear logo - and updated text to reflect your bear build.
Print settings should reflect Prusa's recommendations.
A couple of options to choose from;
Single color print. Choose either LCD_Cover_FULLBEAR.STL or LCD_Cover_HALFBEAR.STL. These files extrude the text and logo by 3 layers.
- Multi color print. Choose the stencil and stencil_case for either the FULL or HALF variant you want. I.e., for a full bear; LCD_COVER_FULLBEAR_stencil.STL and LCD_COVER_FULLBEAR_stencil_case.STL. These files extrude the text and logo by 2 layers.
If you're printing color with a single extruder, load the two files as two parts in a single object in Slic3r. You can then set the case as a modifier and only slice the stencil - print it, then vise versa for the rest of the case.
If you're printing color with multiple extruders, I believe you can do as above (load as one object with two parts) and select whatever extruder for whatever part.
Here's a great writeup on multi-color printing, with slic3r - with a single extruder, highly recommended reading;
Probably best to print this with the same settings Prusa recommends.