by FLOWALISTIK, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I would love to keep sharing my projects with all of you. If you enjoy with my designs, I invite you to become a patron, you will get early access to my designs and exclusive content! Also, you can help with a small donation.
NOTE: You can check my newest designs in my YouMagine profile! More Low-Poly and other simple designs!
Designing a low-poly Pokemon is the best way I found to represent the poor graphic quality the first Pokemon games had. So, here I present you the low-poly Bulbasaur, which is part of the Low-Poly project I'm developing.
3D printers allow to make real the idea of catching all Pokemon, and I'm currently working to make all the Pokemon I can. You can check the collection in the following page:
This model is 5cm tall approximately. The model from the picture was printed with a Prusa i3, 0.2mm layer height, 0.5mm nozzle, 45mm/s speed and a cooling fan (I really recommend this!). The material is 3mm high quality PLA.
It was designed so it doesn't need support material, although each printer is different and it may be more difficult to print it depending on the settings.
// This design is based on Pokemon
Upgrade this Thing with Thingiverse AppsPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Low-Poly Bulbasaur by FLOWALISTIK is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving FLOWALISTIK a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure FLOWALISTIK would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).