Latch modelled off a Vessels hatch.
Designed to have Clip at bottom and Latch above which can then be locked around the Clip
Can be locked with Padlock.
Hinged using two M3 20mm bolts and corresponding Locknuts.
Latch can be printed as whole with Clip Separate.
Individual latch parts can also be printed separately if required
Latch currently needs to be printed with supports (touching Build Plate only) however Clip can be printed without supports if the base is on build plate.
Infill dependant on required strength.
2 x 20mm M3 bolts with
2 x M3 nylon lock nuts