all stl files for 42 mm stepper, vulcano, microswiss or stock hotend only here: https://cults3d.com/en/3d-model/tool/flexion-extruder-cr10-for-microswiss-mk8-and-vulcano
I like to print TPU and super flexible stuff, so want to fix my flexion on my cr10.
There is some other things here for flexion, but i want the stepper in top of the axis and not in front so the wight is not hanging in the front and shaking around and the flexion extruder is faced in front and easy to handle.
file here is only
this one is without fan wall little bit flat for smaller 32mm stepper
for 42mm stepper motor stock or microswiss hotend:
for the higher vulcano heatblock.
i use this vor print abs, because i print with high speed (100-180mm/s with octoprint klipper software), the stepper motor is jumping with the normal hotend on this speed.
with the vulcano hotend the filament have longer way for heat up and melt.
for no misunderstanding!
i use the stock hotend or microswiss and mount the vulcano heatblock!
Works also perfect for all other stuff like abs, nylon, petg, pla, tpu
0.4 nozzle with 0.2 layer height
noname pla PLA