Hinges and clip to allow you use your Vive DAS with your pimax 5k or 8k. There is a shorter and longer version of the side hinges depending on the size of your head. No supports required for top clip.
If you are having issues with the clip snapping on the top adapter, I created Pegged version that's more reliable. If you are ordering to get these parts printer I'd suggest you get this version since it wont have a change of breaking on you. Its a tight fit so once you put it in you'll need to use pliers to get it out. The side on the peg that has a indentation should face away from the front of the headset when put in.
You can pick up the Vive DAS here:
You may also want to get thicker padding from here if you can't get a tight fit(Make sure to get the 20mm version):
How to install side adapter:
Added side adapter version that can be printed on its side.
Removed the old side adapters to stop confusion. It looks like Pimax has made it hard to remove the front facemask. Luckily the new side adapters can be attached without having to remove the facemask.
Default settings with Slic3r PE
0.15mm layer height