Just in time for Christmas the final update to our Halloween project.
A case for Adafruit's Animated Eyes Bonnet for Raspberry Pi using the US-100. (No more level shifters.) The case will mount either a Pi Zero or a full sized Raspberry Pi on the front inside face or inside bottom of the case. The US-100 mounts through the front of the case. The idea is to place the box in a dark place and uses the sensor to wake the effect up a programmable distance.
The fourth generation of the case for Adafruit's Animated Eyes Bonnet for Raspberry Pi provides for an interchangeable solution to protect the TFT's. The provided example cover works with any 40MM round cover. This includes AdaFruit's glass lens (https://www.adafruit.com/product/3853) and plastic lens (https://www.adafruit.com/product/3917.) It is a good idea to mask the TFT with tape or dark construction paper to prevent light leakage around the edges.
The original design that used the HC-SRO4 can be found at:
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.