This collection was started from a project i had in mind, can be used as anything from a child's building set to using them to build shelves. Screw holes were purposely left out in case you wish to scale up or down (in most cases), at 35% + infill its more than enough to safely drill your own holes. Built it gusset's for extra strength.
45_1 the pipes will need to be notched / cut at an angle also.
NOTE: Parts uploaded before 12/24/2018 have a 23.5mm opening, parts uploaded on or after 12/24/2018 are 23.8mm - 24mm, so scale accordingly.
Designed for 3/4" EMT but with scaling will work for other pipe diameters, a rough idea for sizes goes...
76% for 1/2" EMT
125% for 1" EMT
less than 0.2 for strength