APPLE SEEDER / APFELENTKERNER V2
This is version 2 of the apple seeder. It is designed to be printed horizontally instead of vertically which results in a much stronger and more stable print.
If you want it to be ULTRA stable, choose ABS filament and give it an Acetone smoothing to firmly weld all layers together. It's nearly undestroyable then.
Hint: you can also scale the print to a smaller size (80% or 90%, for example) if you want to use it with small sized fruits.
- Layer height: 0.2mm
- Infill: 12%, Cubic
- Supports: not required
- Brim / Skirt: not required
- Flow: 110%
- Print Speed: at least 75mm/sec
Uploaded a second variant which is completely hollow plus a 'pusher' that can be used on it to quickly remove the cut out fruit part.