I used RC_Showdown's great model and made a few modifications:
- more space efficient nesting
- reduced points on curved geometry
- removed a few stray lines/points
- minor changes in the geometry (lenshood/cut outs)
The model was cut from 9.5 mm beech plywood with a 2.4 mm spiral toothed end mill on my Sorotec BasicLines. It took approx. 10 minutes. After the glue-up I finished the model with mineral oil.
In order the round the tires I mount them on my cordless screwdriver and sand the edges. Works great and removes any marks from the cnc. I did refrain from dying the tires because I had to finish quickly. This truck will be a nice Christmas present for a friend of mine.