This is an LCD cover for your Original Gameboy which adds a nice little compartment for the easy_VGA device. The easy_VGA allows the Gameboy to display content to a monitor using VGA. This cover is meant for those who have a Gameboy with a broken LCD and wish to install the easy_VGA. I did not create the easy_VGA device credit for that goes to uXe.
- is the updated file, slightly smaller over all to fit better on the DMG, and larger holes to fit bolts better
- added STL file
supports are recommended for ABS or PETG
the cover is Attached by 4 M3*20mm bolts and 4 M3 nuts, I drilled holes on the Gameboy shells front half corresponding to the easy_VGA covers holes, and fastened it together with the M3 nuts and bolts
you may have to drill the holes out a little bigger depending on material shrinkage.