Ender 3 CPAP add-on with x4 5015
This thingi lets you use CPAP pipes and x4 5015 blowers to replace the bullseye or Hero Me 2 and its single 4010 stock blower. This provides more cold air at slightly lower noise, or a lot of cold air with a lot of noise...
Also uploaded a Hero Me 2 version of the CPAP adapters and a matching bltouch mount as the original one on the Hero Me 2 gets in the way. I find the Hero Me 2 designs to be more compact and has a wider air outlet compared to the bullseye, but both are good. In the photos the black prints are the Bullseye and the blue prints are the Hero Me 2 version.
A 4020 mount for (https://www.thingiverse.com/thing:3213609) so i can put this on top of my Ender 3 as shown in the photo.
Running the fans of a mosfet just to be safe (one with red heat sink) with room for an extra dc-dc converter for 12V hot end fan in the future.
This also requires a Petsfang part, the BULLSEYE_BASE_CREALITY_9.27.stl (https://www.thingiverse.com/thing:2759439). Petsfang do a lot of awesome work in boosting the performance of the Ender 3.
And some custom wire clips to make it all nice and neat
Print 0.1mm layer height and in black!
Thanks to all the designs already on thingiverse that made this possible.